Anchoring single Pt atoms on hollow Ag3VO4 spheres for improved activity towards photocatalytic H2 evolution reaction

The high cost of noble metal catalysts has been a great bottleneck for the catalyst industry. Using the noble metal at a single-atom level for catalytic applications could dramatically decrease the cost. The impacts of single Pt atoms on the photocatalytic performance of Ag₃VO₄ have been investigated and reported. In this report, single Pt atoms were anchored on the surface of Ag₃VO₄ (AVO) as a cocatalyst, and the resultant composite photocatalyst has been studied for photocatalytic H₂ production from water driven by visible light. The as-prepared AVO particles are hollow nanospheres in the monoclinic phase with a bandgap of 2.20 eV. The light absorption edge of AVO/Pt is slightly red-shifted compared to that of the pristine AVO, indicating more visible light absorption of AVO/Pt. The XPS peaks of Ag, V, and Pt exhibit a significant shift after AVO and Pt get into contact, suggesting the strong interaction between the surface Ag and V atoms, and single Pt atoms. After 3-h illumination, the photocatalytic H₂ evolution amount from AVO/Pt is improved up to 1400 μmol, which is 2.8 times that on the bare AVO. Such efficient photocatalytic H₂ evolution on AVO/Pt is still maintained after five reaction cycles. The better photocatalytic performance of AVO/Pt has been attributed to the more efficient visible light utilization and the lower interfacial charge transfer resistance, as demonstrated in the DRS and EIS spectra. The presence of the surface Pt atoms also leads to a higher amount of reactive radicals, which could efficiently promote the surface redox reactions.     

矿用液压支架顶梁焊接变形控制措施实践研究

文章以ZF13000型液压支架顶梁结构的焊接过程为例,详细介绍了自动化焊接对钢板变形的影响。结果发现:自动化焊接时,钢板之间虽然没有相互约束,但由于自动化焊接过程的稳定性,且利用胎架对顶板进行固定,有效避免了焊接过程中钢板的变形,其最大变形量严格控制在了4 mm范围内。该方案值得进一步推广使用。     

研一流科技领家电发展——《家电科技》创刊40周年

《家电科技》创刊于1981年,迄今己走过40年的岁月征程.40年中,《家电科技》以科技为本,积极服务于家电行业的技术创新和科技进步,持之以恒推进行业标准化建设,力争为行业创新科技成果发声.40年中,《家电科技》以质量为基,加强刊物标准化、规范化建设,引入现代化办刊方法,严防学术不端,多维度提升传播能力.40年中,《家电科技》以团队为荣,依靠编委会、理事会协作办刊,不断壮大国内外专家队伍,提升编辑人员技术水平.初心如磐,使命在肩.《家电科技》将继续以记录和传播行业技术进步为己任,朝着助力家电产业创新发展的目标努力前行.     

Modeling and numerical investigation of hydrogen nucleate flow boiling heat transfer

Liquid hydrogen flow boiling heat transfer in tubes is of great importance in the hydrogen applications such as superconductor cooling, hydrogen fueling. In the present study, a numerical model for hydrogen nucleate flow boiling based on the wall partition heat flux model is established. The key parameters in the model such as active nucleation site density, bubble departure diameter and frequency are carefully discussed and determined to facilitate the modeling and simulation of hydrogen flow boiling. Simulation results of the numerical model show reasonably well agreement with experimental data from different research groups in a wide operation condition range with the means absolute error (MAE) of 10.6% for saturated and 5.3% for subcooled flow boiling. Based on the model, wall heat flux components and void fraction distribution of hydrogen flow boiling are studied. Effects of mass flow rate and wall heat flux on the flow boiling heat transfer performance are investigated. It is found that in the hydrogen nucleate flow boiling, the predominated factor is the Boiling number, rather than the vapor quality. A new simple correlation is proposed for predicting hydrogen saturated nucleate flow boiling Nusselt number. The MAE between the correlation predicted and experimentally measured Nusselt number is 13.6% for circular tubes and 12.5% for rectangular tubes. The new correlation is applicable in the range of channel diameter 4–6.35 mm, Reynolds number 64000–660,000, saturation temperature 22–29 K, Boiling number 8.37 × 10^?5–2.33 × 10^?3.     

望虞河排水能力初步研究

通过收集和处理2015—2020年望虞河代表站的水位、潮位和排水量数据,采用多元回归法对上游水位、长江潮位和望虞河排水流量进行回归分析,计算得到望虞河的排水能力.另外,比较多元回归法和一潮推流法计算的日排水量发现,多元回归法计算公式的系数固定,能客观反映望虞河的排水能力,而一潮推流法计算公式的率定参数每年都有变化,在实际应用中较为复杂.研究结果表明,望虞河的排水能力与上游水位呈正相关关系,与长江潮位呈负相关关系.     

用背角准弹散射研究近库仑势垒能区重离子核反应

利用背角准弹散射的方法开展了近库仑势垒（近垒）能区重离子核反应机制的研究。高精度测量了深垒下能区16O+152,154Sm、184W、¹⁹⁶Pt和²⁰⁸Pb等体系的背角准弹散射激发函数，用耦合道计算抽取了核势的表面弥散参数，结果表明考虑耦合道效应得到的表面弥散参数值正常。基于背角准弹散射势垒分布对核结构的敏感性，尝试用深垒下能区16O+152Sm、170Er和174Yb等体系的背角准弹散射来抽取形变靶核的十六极形变参数，所抽取值与已有结果趋势一致，说明了该方法的可行性。此外，研究了弱束缚核体系的破裂效应，其表现为背角准弹势垒分布较全熔合势垒分布向低能移动，所得结果进一步说明势垒分布同时含有核结构和核反应机制的信息。     

利用碳钢铸坯组织灰度图获取C含量分布的方法

摘要：基于热酸洗腐蚀原理与图像光学理论，提出运用金属低倍组织灰度分析技术（灰度分析法）获取中高碳钢铸坯的低倍组织中不同位置不同区域不同尺度的一维、二维C元素含量分布。偏析严重的位置得到的C元素含量高，初始凝固的晶粒中心位置得到的C元素含量低，说明通过灰度分析法计算的C元素含量分布能与低倍组织形貌很好地对应。同时，通过电子探针与灰度分析法的测量结果对比，发现二者C元素含量的变化趋势具有很好的一致性，这验证了灰度分析法的有效性。另外，低倍组织图像整体亮度的改变不会造成由灰度分析法所测量的C元素含量发生明显改变，则表明灰度分析法对测量环境的变化具有一定的抗干扰能力，也间接说明了其可靠性。     

高能电子成像研究进展

本文通过蒙特卡罗程序EGS模拟研究了电子束与靶的相互作用，对成像束流光学进行了设计，并对束流匹配对空间分辨的影响、超快分束技术和产生横向均匀束技术等进行了模拟研究。实验验证了高能电子成像能达到μm量级的空间分辨，并可实现厚度、密度分辨及明-暗场成像等特点。同时给出了后续实验及研究计划，希望进一步提高高能电子成像性能并拓宽其应用领域。     

Reusable Floating Beads with Immobilized Xylose-Fermenting Yeast Cells for Simultaneous Saccharification and Fermentation of Lime-Pretreated Rice Straw

Novel bioreactor beads for simultaneous saccharification and fermentation (SSF) of lime-pretreated rice straw (RS) into ethanol were prepared. Genetically modified Saccharomyces cerevisiae cells expressing genes encoding xylose reductase, xylitol dehydrogenase, and xylulokinase were immobilized in calcium alginate beads containing inorganic lightweight filler particles to reduce specific gravity. For SSF experiments, the beads were floated in slurry composed of lime-pretreated RS and enzymes and incubated under CO₂ atmosphere to reduce the pH for saccharification and fermentation. Following this reaction, beads were readily picked up from the upper part of the slurry and were directly transferred to the next vessel with slurry. After 240 h of incubation, ethanol production by the beads was equivalent to that by free cells, a trend that was repeated in nine additional runs, with slightly improved ethanol yields. Slurry with pre-saccharified lime-pretreated RS was subjected to SSF with floating beads for 168 h. Although higher cell concentrations in beads resulted in more rapid initial ethanol production rates, with negligible diauxic behavior for glucose and xylose utilization, no improvement in the ethanol yield was observed. A fermentor-scale SSF experiment with floating beads was successfully performed twice, with repeated use of the beads, resulting in the production of 40.0 and 39.7 g/L ethanol. There was no decomposition of the beads during agitation at 60 rpm. Thus, this bioreactor enables reuse of yeast cells for efficient ethanol production by SSF of lignocellulosic feedstock, without the need for instruments for centrifugation or filtration of whole slurry.